(as of Jan 02,2021 02:10:49 UTC – Details)
Never worry about the fill level of your PCP tanks again. When your tanks fall to around 2000 PSI, those runs to the SCUBA shop to have them topped off can be a real nuisance. As long as you have a typical single-phase 110V outlet available, you will have all of your compressed air needs covered at home. Just pre-set the desired pressure, prepare the cooling system, and monitor the pump as your tanks are quickly and safely refilled to capacity for ready use whenever you need them.
This long-lasting compressor will serve your PCP air needs for years to come. You may buy many more paintball guns, airsoft equipment, or new SCUBA gear through the years, but the PCP Air Compressor Pump will be the only purchase you need to keep your equipment supplied with filed PCP tanks.
Item Type: high pressure compressor pump
Material Type: Aluminum
Fuel: Silicone oil
Work Flow: 50L/min
Power Supply: 110V/60Hz
Rotating Speed: 2800r/min
Working Pressure: 0-30Mpa
1 X110V high pressure 30Mpa air pump compressor
1 set of water cooling pump
1 set of accessories
WIDE APPLICATION: This pump is perfect for all Pre-Charged Pneumatic (PCP) compressed air needs Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc.
Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 40L/min; noise less than 78 dB, air hose connector 8 mm quick-connect fitting Oil standard: IS0 VG 46 & AW 46
ADJUSTABLE PRESSURE – This pump is designed for superior ease of use. Set the desired pressure needed for the tank being filled and let the machine do its work. The pump will automatically stop when the pre-set pressure is reached. The maximum pre-set pressure is 30 MPa, and any pressure under the maximum can be pre-set for each tank to be filled.
COOLING SYSTEM – The pump is designed with a self-contained water cooling system and its system temperature is monitored by a battery-powered digital thermometer. You will prepare the cooling water to be used by the system in a bucket that the unit will draw from and return water to for cooling and recirculation. Always monitor the temperature display and water supply when using the pump to avoid overheating.
Notice: Please prepare enough cooling water, it is recommended to be a vat of water to achieve better cooling effects. The water in container should be no less than 20L/5 gallon.WORKING WITHOUT WATER IS FORBIDDEN!