(as of Jan 01,2021 22:57:03 UTC – Details)
A single working time cannot exceed 30 minutes, the machine temperature cannot exceed 80 degrees Celsius. If the working time is too long or the temperature is too high, the device will enter the over-temperature protection state, automatic shutdown. If the machine is too hot, automatic shutdown is a normal phenomenon, have a rest after a few minutes the temperature can return to normal, then start again. When the pressure reaches 30MPA / 300bar, the pump will shut down automatically.
Item Type: high pressure compressor pump
Material Type: Aluminum
Fuel: Silicone oil
Work Flow: 50L/min
Power Supply: 110V/60Hz
Rotating Speed: 2800r/min
Working Pressure: 0-30Mpa
1 X110V high pressure 30Mpa air pump compressor
1 set of water cooling pump
1 set of accessories
Note: Regarding the type of oil, use conventional car or motorcycle oil
This compressor produces high pressure quickly and efficiently with maximum pressures of 4500 PSI / 30 MPa / 300BAR. The portable unit weighs in at 19kg / 42 lbs and runs on a standard 110V outlet, pulling around 8 amps. The water-cooled compressor charges quickly at 50 L/min.
WIDE APPLICATION: This pump is perfect for all Pre-Charged Pneumatic (PCP) compressed air needs Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc.
Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 40L/min; noise less than 78 dB, air hose connector 8 mm quick-connect fitting Oil standard: IS0 VG 46 & AW 46
COOLING SYSTEM: Water Cooling; COMPRESSION STAGE : Two Stage; Designed with two-stage compression and two water-oil separators for performance stability
Notice:: Please prepare enough cooling water, it is recommended to be a vat of water to achieve better cooling effects. The water in container should be no less than 20L/5 gallon.WORKING WITHOUT WATER IS FORBIDDEN!