110V PCP Air Compressor, 30Mpa 4500psi High Pressure Preset Auto-stop Electric Air Pump Booster for Paintball Tank Filling Inflation Bottle Pneumatic Airgun Scuba Rifle Inflator

    41
    0


    Price: $339.00
    (as of Jan 02,2021 14:27:58 UTC – Details)


    Product Description

    Parameters

    Special function: Pressure preset, Auto-stopVoltage: 100-130V 60HzPower Rating: 1.6KW+Motor Speed: 2800R/MinNoise: MAX 78dBAir Flow Rate: 50L/MinWorking Pressure range: 0-300BAR, 0-30MPA, 0-4500PSITemperature protection: Less or equal to 80 Celsius degree (176 Fahrenheit degree)Cooling System: Water CoolingCompression Stage: Two StageLubrication Mode: Splash TypeCover material: Cast AluminumMotor material : 100% Pure CopperDimension: L350mm* W175mm *H38.3mmOil: L-MH 46 Anti-Wear Hydraulic Oil (High Pressure) GB 11118.1 or 5W-40 oil (Note: the machine is without oil because the oil is not allowed on the plane)Charge rate test: It takes 4 mins to fill full 0.5L tank to 30MPA. / It takes 8.5 mins to fill full 1L tank to 300BAR / It takes about 58minutes to full 6.8L tank to 30MPA.

    Packing list

    1x 30MPA Pressure preset type Air Compressor Pump and power line1x Water Pump 2x Water Pipe1x Filter and flexible pipe8x Filter Element (spare parts)1x Filter plug (for test usage)1x Female End air hose1SET O-Ring (spare parts)2x Explosion-Proof Disc (spare parts)2x Spring (spare parts)1x Oil tank breath plug1x English manual

    11

    Details

    DetailsDetails

    Filter element life time: 10×0.5L (5L gas). After charging the 5L gas, please replace the filter element.

    1.Please and add lube oil into the compressor, and install(replace) oil tang breath plug before running the machine. No.46 wear resistant hydraulic oil.

    2.The machine is zero pressure start, before starting, please release the decompression screw. If there is pressure in your cylinder, do not open the valve until the pressure of the machine is equal to or greater than the pressure of the cylinder.

    3.When the compressor working, the cooling system must be working at the same time.

    4.During working, if the temperature of machine is too high, it will stop working until his temperature returns to normal level. If you want the machine to work long times, please prepare two barrels of 30KG cooling water. When the temperature of the machine reaches 60 degrees Celsius, replace it immediately.

    5.If the machine vibrates violently, please add pad or towel under the compressor

    6.Please remember to pay attention to the level of oil every time before start.

    ParametersParameters

    ❤With function of 0-30Mpa pressure free setting and automatic stop when reach the setting pressure.
    ❤Better use experience because it has not only with functions of automatic stop and pressure setting, and also with 5 improved design based on customer needs.
    ❤Safe usage, with safety valve on low pressure cylinder and with precision explosion-proof valve on the high pressure side
    ❤With two-stage compression, and using high-quality components to ensure stability performance and long service time.
    ❤Water pipes and pumps have been installed in the machine before shipping, reduces the risk of misoperation.

    LEAVE A REPLY

    Please enter your comment!
    Please enter your name here